Suche
Unten sind die Ergebnisse Ihrer Suche gelistet.
Volltextergebnisse:
- pec-gbt
- a terminal. The light sensor is connected to ADC1 Channel 6 and the terminal is Uart on UART1 A9. **AI Sol... d then a level sensor should be connected to ADC1 channel 7 and a control center to Uart1 A9. An 8-bit sens... 1000. According to the data sheet, B0 is Timer 3 Channel 2. **AI Solution 7 for STM32F042:** <code pseudo... to B6. And then I need a pressure sensor on ADC1 channel 3 and a PC terminal via Uart1 A9. A 10-bit sensor
- mm32_analogdaten_in_c_erfassen
- O_Init(GPIOB, &led); // 3. Configure ADC channel on PA7 RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GP... 1, &ADC_InitStruct); // 6. Configure ADC channel ADC_RegularChannelConfig(ADC1, ADC_Channel_7, 1, ADC_SampleTime_239_5Cycles); // 7. Enable AD
- mm32_dim
- ür das Pin B0 ergibt sich die Möglichkeit TIMER 3 Channel 3 zu nutzen. Im PEC Framework steht uns der Bibli... nk&700|}} Die konkrete Hardwareanbindung Timer3, Channel3, PinB0 muss in der Realisierung erfolgen. {{:mm... b0.png?direct&160|}} **__MERKE:__ PWM = Timer + Channel + Pin**\\ ===== Realisierung ===== Die Realisi... h muss die konkrete Hardwareanbindung für Timer3, Channel3 und PinB0 erfolgen. Dazu suchen wir die entsprec
- pec_ref
- > wird für PecAdc... benötigt <code cpp> #define %channel% N // 0, 1, 2, ... </code> >**adcResolutionX** ... hannela.png?nolink&280|}} <<parameter>> für Pec...Channel <code cpp> #define %channel% X // A, B, C, ... </code> ===== anwendungsorientierte TIMER Bausteine =====
- mm32_adc
- 300|}} Demzufolge ist Pin A7 auch gleich der ADC-Channel 7. Jetzt haben wir alle nötigen Informationen um
- mm32_ein_pwm-signal_genereieren_in_c
- l = timerPeriod / 2; // 8. Configure PWM channel 2 TIM_OCInitTypeDef TIM_OCStruct; TIM_OCS